RE | CLASSIC REBORN | Compatible | Simtac | With Switch [V6.0] | PNP Hazard Flasher / Adapter / Module | CLSRE-WS6
₹1,599.00₹1,999.00 (-20%)
This “SMART” upgraded Plug and Play Hazard Module/Flasher [V6.0] for RE | CLASSIC REBORN is a safety device which outsmarts the previous hazard flasher [V2.0] and it comes with active memory feature along with all new upgraded switch and can be fitted easily without any cutting or slicing of wire.
This Tourer Edition Flasher allows you to blink all the 4 indicators at the same time in best 40 multiple flashing styles [i.e. quick flash, slow flash, police patrolling]which makes you visible from a long distance. Thus, enhancing your Presence on road leading you to a safer zone specially in unfavorable conditions i.e. fog, storm, rain etc.
Best product for Highways/Fog/Mountains/Heavy Rain/Storm driving
⇒ Package Contents :
- Hazard Module(1 nos.)
- Control Switch(1 nos.)
- Jumper wire (1 nos.)
- PNP Lead (1 nos.)
- Warranty Card (1 nos.)
- Thank you Card (1 nos.)
- Wiring tie ( 2 nos.)
✔️ 36 Months Replacement Warranty
⇒ Features :
- 36 Months warranty
- Easily installed in RE CLASSIC REBORN
- Plug N Play Fitment[No wire cutting or slicing required]
- Active Memory
- Smart Auto ON
- Doesn’t void bike’s warranty
- Override Feature [ Hazard Auto Pause when Indicator Signal is given. Hazard Auto Starts when Indicator Signal stopped.]
- Waterproof
- One Touch Operational Control Switch
- Convertable
- Best ever 40 Modes for flashing indicators in different styles i.e. quick flash, slow flash, police patrolling
- Flashes all 4 indicators at the same time and makes you visible from a long distance.
- Shock Proof
- Hyper Flash control
- Sleek and Solid Design
- Increases Road Safety. So, best product for highway/ mountain/heavy rain/storm driving
- Increases biker’s visibility especially in the case of FOG
- Industrial Grade Components used
36 Months Replacement Warranty
Points to be taken care of :
- In case of any defect in our product for example workmanship or failure to meet the specification of the product within the warranty time, our company will replace the complete product.
- If any part of the product is removed/ altered/ tampered/modified/ dismantled or repaired; warranty will be void and it will not be claimed for replacement of product.
- Stamp, Signature and Date must be duly filled by the authorized person in warranty card in order to claim the warranty.
This simtac hazard comes with genuine OEM couplers that are connected directly to bike’s suitable couplers without slicing/cutting of any wire. Therefore, making the installation so easy so that it can be installed by anyone. One just need to plug the couplers in correct mentioned bike’s module and it woule be ready to play (work).
This overide feature is one of the unbeatable feature which makes your ride hassle free i.e. one can easily use the normal indicator while the hazard light flasher is ON. For Example, if you want to turn on any side indicator say Right side, then hazard flasher will automatically goes in standby mode and the right side indicator will be turned ON. As soon as the indicator is turned off, hazard flasher will again start working.
This simtac hazard comes with all new reinvented switch. which is now more durable, waterproof, light weight and more premium. This all new switch is easy to operate as it comes with one touch operation. The single press on the switch will turn ON the hazard flasher. When again pressed while the hazard flasher is on, then the pattern will be changed to the next. Long press for 2 seconds or more will turn OFF the hazard flasher.
Now you don’t need to select your own preferable pattern again and again like before. This new upgraded hazard flasher comes with an ACTIVE MEMORY which automatically saves your last used pattern, it will facilitate the same pattern whenever your bike.
This Simtac hazard flasher is rock solid which is cent percent sealed from every corner so as to prevent from a single droplet of water.
Your hazard flasher will remain fully protected and will work in unfavorable conditions in every tough ride.
This new upgraded simtac hazard flasher is designed in such a way so as to make it a pocket friendly device i.e. you can now easily switch your hazard flasher from one bike to another by just purchasing only Plug and Play Lead for the bike you want to switch. It is easy to install and doesn’t cost a bomb unlike other bike accessories.
As it name suggests, this all new upgraded flasher will act smartly in this case. You don’t have to keep an eye on turning the hazard flasher on every time you ignite your bike which means when you start your bike, this hazard flasher will be automatically in an ON state if it was ON at the time your bike was turned off.
This simtac hazard flashes your indicators in 40 different patterns like hazard, police patrolling, US army that comes handy while off- roading or long drive to highways / mountains during normal or extreme weather conditions to have distinctive appearance. These patterns are unique and vary in frequency making sure vehicles at a distance are alert while moving in same direction.
This upgraded simtac hazard flasher comes with first time ever FLAT 3 YEARS WARRANTY which gives you a complete piece of mind and value for money product. A warranty card will be issued at the time of purchase. You can directly contact through our whats app number 8899640640 and claim it whenever needed. For more details, kindly visit warranty tab.
Additional information
| Weight | 250 g |
|---|---|
| Dimensions | 17.5 × 13 × 5.5 cm |
| Bike Made | Royal Enfield |
| Bike Model | CLASSIC REBORN |
| Brand | Simtac® |
| Code | MTR-WS6 |
| Design | Solid and Sleek Design with Rounded Corners |
2 Reviews For This Product
Got something to discuss?
Can I use it in RE Sand storm rider BS IV ?
Dear Sir,
We would like to inform you that this flasher is not compatible in your bike. You can order compatible flasher for your bike by this link: https://simtacauto.com/product/cls-ws
i want to know, if i install this along with the switch, will i be able to use my stock switch or i have to completely depend on the external switch that i get with the module.
Dear Sir,
We would like to inform you that you can use this flasher with external switch which you got with the Hazard flasher. Switchless flashers will work with stock switch of bike.
Plz tell something when it will be available. Don’t just reply soon man 🙄
Dear Sir,
We would like to inform you that Version 6.0 flasher are under production and it will be available soon.
When it will be available?
Dear Sir,
We would like to inform you that it’s under production sir, It will be available soon.
Give some idea at which month it will be available
Dear Sir,
We would like to inform you that it is under production and it will be available soon.
Bhai or kitna intezar karaoge yaar kab aaega stock mein
Dear Sir,
We would like to inform you that Version 6.0 is under production. It will be available soon on our website.
by Harish Reddy (verified owner)
using my classic reborn Excellent product working good💯 but price little high.
by Shubham
Dear Sir,
Thank you so much for your appreciation. We’re always working for satisfaction of our Tech Family Members and we’re glad that you loved our product